M
MeteorWayne
Guest
I've become aware of new book describing the TV systems used for the Apollo broadcasts in transit and on the lunar surface. There was quite a bit of advancement over the relatively short period from slow scan B&W to much more resolution and higher scan rate color video.
First Camera:
The RCA Block I TV Camera was used sucessfully on the first manned flight of Apollo 7, and was also the camera which brought the world its first live look back on itself during the flight of Apollo 8...
Camera Specifications:
•RCA Vidicon tube
•Lines per video frame: 320
•Frame rate: 10 frames per second
•Black and white
Last Missions:
The RCA Ground Controlled Television Assembly (GCTA) was used on the last three missions of Apollo 15, 16 and 17. It was mainly mounted on the Lunar Rover and remotely controlled via commands sent from Houston. Thus people were able to watch the lunar launch of the LM at the end of the lunar EVAs.
Camera Specifications:
•Frame rate: 60 frame/s BW / 20 frame/s color (color filters alternated between each field)
•Color: Field-sequential color system
•Spectral response: 350–700 nm
•Sensor: Silicon Intensifier Target (SIT) Tube
•Optics: 6x zoom, f/2.2 to f/22
•Automatic light control (ALC): average or peak scene luminance
Personally, as a child of the Mercury through Apollo missions, and a 35 year technician/engineer on television broadcast and test and measuremant products, it sounds really interesting to me. :ugeek: :ugeek:
Once I get a chance to read it, I'll report more.
http://www.livetvfromthemoon.com/About_the_Book.html
Wayne
First Camera:
The RCA Block I TV Camera was used sucessfully on the first manned flight of Apollo 7, and was also the camera which brought the world its first live look back on itself during the flight of Apollo 8...
Camera Specifications:
•RCA Vidicon tube
•Lines per video frame: 320
•Frame rate: 10 frames per second
•Black and white
Last Missions:
The RCA Ground Controlled Television Assembly (GCTA) was used on the last three missions of Apollo 15, 16 and 17. It was mainly mounted on the Lunar Rover and remotely controlled via commands sent from Houston. Thus people were able to watch the lunar launch of the LM at the end of the lunar EVAs.
Camera Specifications:
•Frame rate: 60 frame/s BW / 20 frame/s color (color filters alternated between each field)
•Color: Field-sequential color system
•Spectral response: 350–700 nm
•Sensor: Silicon Intensifier Target (SIT) Tube
•Optics: 6x zoom, f/2.2 to f/22
•Automatic light control (ALC): average or peak scene luminance
Personally, as a child of the Mercury through Apollo missions, and a 35 year technician/engineer on television broadcast and test and measuremant products, it sounds really interesting to me. :ugeek: :ugeek:
Once I get a chance to read it, I'll report more.
http://www.livetvfromthemoon.com/About_the_Book.html
Wayne